Midi Delay - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

Delay

Midi Delay

This is a single-tap delay with smooth, clickless MIDI clock synchronization, and
dedicated high and low filters. You can also modulate the delay times smoothly via
MIDI controllers.
Input
Source
Left, L + R. This is a mono-in, stereo-out effect. Stereo signals are preserved in the
dry mix at the output, but the effect itself has only a single, mono input.
When this is set to Left, only the left channel will be routed into the effect.
When this is set to L + R, the left and right channels will be summed together, and
then routed into the effect.
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
Level Mod
List of Modulation Sources. This sets the modulation source for controlling the
input level, for "splashed" delays. For a complete list, please see "Modulation
Sources" on page 2.
Mod Amount
+/-100. This sets the amount by which the mod source affects the input level.
Delay Mode
Delay Mode
Delay Time, Manual Tempo, MIDI Tempo. This determines how the delay times
will be controlled.
Delay Time. The delay times will be controlled by the tap's Delay Time knobs.
Manual Tempo. The delay times will be controlled by the combination of the
Manual Tempo knob and each tap's Note Value menu.
MIDI Tempo. The delay times will be controlled by the combination of received
MIDI clocks and each tap's Note Value menu.
Manual Tempo
40-240bpm. This sets the tempo for the delays, when the Delay Mode is set to
Manual Tempo.
OASYS PCI
Midi Delay
331