St Step Chorus - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

Chorus

St Step Chorus

This is a stereo-in, stereo-out chorus, with a step effect on the LFO. You can enhance
the stereo effect by offsetting the phase of the left and right LFOs from each other.
Input
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
Stereo Chorus
Left Delay
0.0-50.0ms. This sets the delay time for the left channel, in milliseconds.
Right Delay
0.0-50.0ms. This sets the delay time for the right channel, in milliseconds.
Depth
0-100. This controls the depth of LFO pitch modulation.
Depth Mod
List of Modulation Sources. This sets the modulation source for controlling the
LFO depth. For a complete list, please see "Modulation Sources" on page 2.
Mod Amount
+/-100. This sets the amount by which the mod source affects the LFO depth.
Spread
+/-100. This controls the width of the effect's stereo image, without affecting the dry
signal. A value of +100 gives the widest stereo image, and a value of 0 collapses the
output to mono. Negative values will reverse the left and right channels of the
effect output.
You can also use the L/R Phase parameter to enhance the stereo effect.
LFO
Waveform
Triangle, Sine. This selects the shape of the LFO.
OASYS PCI
St Step Chorus
271