St Tempophaser - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

Phasers

St TempoPhaser

This is a stereo-in, stereo-out phaser with a complex, MIDI-syncable tempo LFO.
Try modulating the LFO parameters, such as shape, smoothing, and L/R phase, in
real time.
For detailed instructions on working with MIDI-synced LFOs, see "MIDI Tempo
LFOs" on page 5.
Input
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
Stereo Phaser
Center
0-100. This sets the center frequency of the phaser.
Depth
0-100. This controls the amount of LFO modulation of the center frequency.
Resonance
+/-100. This sets the amount of resonance in the phaser effect. Higher resonance
settings create a more extreme sound.
Hi Damping
0-100. This controls the amount of high frequency damping in the phaser
resonance.
Spread
+/-100. This controls the width of the effect's stereo image, without affecting the dry
signal. A value of +100 gives the widest stereo image, and a value of 0 collapses the
output to mono. Negative values will reverse the left and right channels of the
effect output.
LFO
Waveform
Waveform
Triangle, Sine, Saw Up, Saw Down, Square, Sample & Hold. This selects the
waveform of the LFO.
OASYS PCI
St TempoPhaser
579