Setting The Pump Operation Control Mode; Setting The Dip Switch - EBARA ESA300W Instruction Manual

6.3.1 Setting the pump operation control mode

A case of display if Local mode selected.
SET
CONTROL MODE ？
REMOTE MODE : Enables the remote operation
LOCAL MODE : Enables the local operation
COM MODE
The mode that is currently not set is displayed.
If you do not need to set, press PRG. key to go back to the previous screen.

6.3.2 Setting the DIP switch

ＰＲＧ．
SET
ENTER
DIP SW？
ＰＲＧ．
See 6.4 for details of the DIP switch.
PRG.
REMOTE MODE?
ENTER
COM MODE?
PRG.
(start/stop with external signals)
(start/stop with the LCD controller)
: Enables the communication operation
(start/stop with RS232C communication)
SET
ENTER
DIP SW A？
△
▽
SET
ENTER
DIP SW C？
ENTER
ENTER
A1 ON ﾛ ﾛ
ENTER
OFF ﾛ ﾛﾛﾛﾛﾛ
SETTING COMPLETED
ＰＲＧ．
C1 ON
ENTER
OFF ﾛﾛﾛﾛﾛﾛﾛﾛ
The up and down arrow keys, "▲" and "▼,
" turn On and OFF the DIP switch.
The key BZ.OFF switches the selection
from 1 to 8.
(41)
Setting done
Setting done
A1:DATA LENGTH
8BIT
C1:PUMP N2 WARN
OUTPUT N.OPEN
EBARA
CORPORATION