Setting The Pump Operation Control Mode; Setting The Dip Switch - EBARA EV-S20 Instruction Manual

5.3.1 Setting the pump operation control mode

A case of display if Local mode selected.
SET
CONTROL MODE？
REMOTE MODE : Enables the remote operation
LOCAL MODE : Enables the local operation
COM MODE
The mode which is currently not set is displayed.
If you do not need to set, press PRG. key to go back to the previous screen.

5.3.2 Setting the DIP switch

ＰＲＧ．
SET
ENTER
DIP SW？
ＰＲＧ．
ＰＲＧ．
PM10U
PRG.
ENTER
PRG.
PRG.
(start/stop with external signals)
(start/stop with the LCD controller)
: Enables the communication operation
(start/stop with RS232C communication)
SET
ENTER
DIP SW A？
△
▽
SET
ENTER
DIP SW B？
△
▽
SET
ENTER
DIP SW C？
See 5.4 for details of the DIP switch.
NOW:LOCAL MODE
SET:LOCAL MODE？
NOW:LOCAL MODE
SET:REMOTE MODE？
NOW:LOCAL MODE
SET:COM. MODE？
The up and down arrow keys, "▲" and "▼,
" turn On and OFF the DIP switch.
The key BZ.OFF switches the selection
from 1 to 8.
A1 ON ﾛ ﾛ ﾛ
OFF ﾛ
B1 ON
OFF ﾛﾛﾛﾛﾛﾛﾛﾛ
C1 ON
OFF ﾛﾛﾛﾛﾛﾛﾛﾛ
ENTER
Setting
Completed
ENTER
ENTER
ＰＲＧ．
Setting Completed
Countdown beginning
ＰＲＧ．
ＰＲＧ．
EBARA
CORPORATION
P.63