Display Settings; To Specify Which Signals Are Displayed; To Clear The Display - Keysight Technologies IntegraVision PA2200 Series Operating And Service Manual

Display Settings

To specify which signals are displayed

To specify which signals are displayed, press [1] or [2] (or [3] or [4] on the PA2203A) and then
press the Signals softkey. Then use the checkboxes to select which signals you want to display.
Press [Display] > Screen Layout to select one of eight ways to position the signals.

To clear the display

To clear the display, press [Clear Display] , or press [Display] > Clear Display .
66 Keysight IntegraVision PA2200 Series Power Analyzers Operating and Service Guide