Software Upgrade Procedure From Venue™ R1 To Venue™ R2 - GE Venue R1 Service Manual

P R E L I M I N A R Y
D 5771498-100, R
IRECTION
8-9-3 Software Upgrade Procedure from Venue™ R1 to Venue™ R2
WHILE THE SOFTWARE UPGRADE PROCEDURE IS DESIGNED TO PRESERVE DATA,
WARNING WARNING
YOU SHOULD SAVE ANY PATIENT DATA, IMAGES, SYSTEM SETUPS TO A BACKUP
MEDIA BEFORE PERFORMING A SOFTWARE INSTALLATION.
IT IS RECOMMENDED TO WRITE DOWN THE TCP/ IP ADDRESS AND THE WIRELESS
NETWORK SETTINGS (IF EXIST) AS THESE SETTINGS WILL BE LOST DURING THE
UPGRADE PROCEDURE.
NOTE: Images in this procedure are for reference only. There may be differences or variations, in accordance
with different software versions.
IMPORTANT Before starting the upgrade procedure, make sure you received a new Activation String
NOTICE
in the upgrade kit.
8-9-3-1 Backup of System Configuration
Perform backup of all system configuration parameters as follows:
1.) Log in to the system as ADM (administrator).
2.) Tap Settings and select Config.
3.) On the Connectivity tab, select Dataflow and make sure the USB Storage option is enabled.
6
EVISION
Figure 8-226 Logging In as ADM
Figure 8-227 Backup Options Tab
Chapter 8 - Replacement Procedures
V ™ S M
ENUE ERVICE ANUAL
8-193