GE Venue R1 Service Manual page 420

P R E L I M I N A R Y
D 5771498-100, R
IRECTION
Note: In case of firmware update errors, the following messages may appear :
•
•
15.)Type in the option key and configure the network settings
16.)Continue with the EZ Config installation as specified in Section 3-6-2-1.
17.)Open: Config screen >> Imaging >> Advanced Tools and make sure the Auto zone increment
8-200 Section 8-9 - Operating System and Application Software Loading Procedures
6
EVISION
Figure 8-242 Venue™ Setup Wizard - Firmware Update Errors
Follow the procedure displayed in the window
If the following errors appear, proceed with T-CFE replacement:
Figure 8-243 Venue™ Setup Wizard - Firmware Update Errors
V ™ S M
ENUE ERVICE ANUAL