System Software - Installation/Upgrade Procedure; Fmi From Dvd; Introduction; Manpower - GE Voluson i BT06 Service Manual

GE
D KTI106052, R
IRECTION
Section 8-2

System Software - Installation/Upgrade Procedure

8-2-1

FMI from DVD

8-2-1-1

Introduction

To update the Systems C:\ image via the FMI FROM DVD button in the System Setup
NOTICE
see: Section 8-2-1-5 "System Software - Installation Procedure (FMI from DVD)" on page
!! NOTICE:
The Software parts to be upgraded (e.g., Ultrasound Application Software, Service Software, EUM,
MS Patches, etc.) depend on the contents of the System DVD being used.
f the currently installed software has to be upgraded to a newer version, and the system DVD being
NOTICE
used is SW 8.2.0 or higher, a new software specific "Permanent key" is required.
!! NOTICE:
Option Key Order System;
If you do not have permission to access OKOS, contact the On Line Center to get the necessary key.
8-2-1-2

Manpower

One person ~ 1 hour (depends on contents of System DVD, peripherals, etc.)
8-2-1-3

Tools

System DVD
8-2-1-4

Preparations

Before performing the Software Update/Upgrade:
A.) make sure that all system functions are working correct
B.) check the current Ultrasound Application Software version and the installed Options
C.) if the currently installed software has to be upgraded to a newer version, and the system DVD being
used is SW 8.2.0 or higher, calculate new software specific "Permanent key" in OKOS.
NOTE: It is NOT necessary to save Full System Configuration (Full Backup) prior to the upgrade.
All existing User Programs, 3D/4D Programs and Auto Text settings remain untouched!
10
EVISION
http://3.187.187.9/OKOS.
Chapter 8 - Replacement Procedures
V i / V e
OLUSON OLUSON
S M
ERVICE ANUAL
page,
SERVICE
8-7.
(Calculated in OKOS
8-3