GE Venue R1 Service Manual page 173

P R E L I M I N A R Y
D 5771498-100, R
IRECTION
5-6-1-6 LCD Display
The LCD display is a 19" LCD screen.
It comprises the following main components:
•
•
•
•
•
The Touch Screen supports the following functionality:
•
•
•
•
•
User interaction with the Touch Panel is by way of touching (tapping) the screen with one finger, or
swiping (sliding multiple fingers across the surface of the screen). The touch panel display is sensitive
to finger and latex gloved hand. In addition to facilitating quick selection of the applicable controls, these
actions enable smooth scrolling, browsing and scaling of the display, as required.
To facilitate comfortable positioning for the operator, the height of the Main Display can be adjusted as
required. For optimal viewing, the screen angle is adjustable; tilting may be between +0
At the tilt of 45
only. To release the tilt clocking mechanism, pull down the tilt and locking handle, located at the front
of the Venue™system, under the cockpit.
In order to optimize the display settings, a light-sensing device (ambient light sensors) located on the
Cockpit (monitor) front is used for measuring the ambient light. This data is processed by the main CPU
which adapts the display setting, accordingly.
5-6-1-7 Monitor - LCD Display Characteristics
5-14
5
EVISION
LCD Panel
LCD Controller
Multi-Touch Surface
Multi-Touch Controller
Glass Layer
Active on touch
Activate on release
Drag-and-drop
Double-click
Right-click
o
, the tilt mechanism is automatically locked and the cockpit can be tilted by additional 5
Table 5-3 Touch Screen- LCD Display Characteristics
Item
Size
Resolution
Number of Bits
Section 5-6 - Cockpit (Monitor) Module
Value
19 inch wide
1280 x 1024
pixels (WSXGA)
Min 8 bits per color
V ™ S M
ENUE ERVICE ANUAL
o o
and -50
o