Connectivity Setup; Introduction - GE Venue R1 Service Manual

P R E L I M I N A R Y
D 5771498-100, R
IRECTION
Section 3-8

Connectivity Setup

NOTE: If connected to a stand-alone network (Peer-to-Peer network with a Venue™ scanner, and an optional
network printer), you should use default delivery settings.
3-8-1

Introduction

To be able to use the network functions when connected to a hospital network, the Venue™ must have
a proper network address.
• Before you can set up the Venue™ , you need to collect some information.
• The Worksheet (see sample
gathering this information.
• Typical source for this information is the network administrator.
3-44
6
EVISION
Connectivity Installation Worksheet
Section 3-6 - Configuration
V ™ S
ENUE ERVICE
on page 2 - 13) can be used for
M
ANUAL