Grounding Continuity - GE Venue R1 Service Manual

P R E L I M I N A R Y
D 5771498-100, R
IRECTION
10-6-4

Grounding Continuity

DANGER
Measure the resistance from the third pin of the attachment plug to the exposed metal parts of the case.
The ground wire resistance should be less than 0.2 ohms. Reference the procedure in the IEC60601-1.
10-18
6
EVISION
ELECTRIC SHOCK HAZARD!
THE PATIENT OR OPERATOR MUST NOT COME INTO CONTACT WITH THE
EQUIPMENT DURING THIS TEST.
1. GROUND PIN
2. OHMMETER
3. Venue™
4. ACCESSIBLE METAL PART:
Figure 10-264 Ground Continuity Test
Section 10-3 - Why Do Maintenance?
• MONITOR HOUSING
• REAR PANEL CONNECTOR
• ANY CASTER/WHEEL SUPPORT
V ™ S M
ENUE ERVICE ANUAL