Cleaning - GE Venue R1 Service Manual

P R E L I M I N A R Y
D 5771498-100, R
IRECTION
10-5-4

Cleaning

10-5-4-1 General Cleaning
Frequent and diligent cleaning of the Venue™ ultrasound unit reduces the risk of spreading infection
from person to person, and also helps to maintain a clean working environment.
WHEN PERFORMING CLEANING PROCEDURES, TO PREVENT THE RISK OF SYSTEM
CAUTION
DAMAGE, ALWAYS OBSERVE THE FOLLOWING PRECAUTIONS:
• Use only cleaning materials and solutions as recommended in the procedures described in the
Venue™ User Manual.
• Do not use any solutions or products not listed in the Venue™ User Manual.
• Never use thinner, benzene, ethanol or methanol alcohol, abrasive cleaners, or other strong
solvents. Only use isopropyl alcohol, when instructed to do so.
• Do not spray any liquid directly onto the Venue™ covers.
• Do not allow any liquid to drip or seep into the system.
• DO NOT scratch or press on the panel with any sharp objects, such as pencils or pens, as this may
result in damage to the panel.
• Make sure not to spill or spray any liquid on the controls, into the Venue™ cabinet, or in the probe
connection receptacle.
• Prior to cleaning, turn OFF power to the Venue™ and disconnect the mains cable.
NOTE: Refer to the Venue™ User Manual for cleaning instructions
10-10
6
EVISION
Section 10-3 - Why Do Maintenance?
V ™ S M
ENUE ERVICE ANUAL