Label Descriptions - GE Venue R1 Service Manual

P R E L I M I N A R Y
D 5771498-100, R
IRECTION
1-7-2

Label Descriptions

The following table shows the labels and symbols that may be found on the Venue™ ultrasound unit,
and provides a description of each label's purpose and location.
Table 1-3
Label Name
6
EVISION
Label Icons and Symbols - Description and Location
Equipment Type BF (man in the box symbol)
IEC 878-02-03 indicates B Type equipment having a
floating applied part.
Provides additional safety precautions such as double
insulation or reinforced insulation, because there is no
provision for protective earthing or reliance upon
installation conditions.
ATTENTION- General warning sign
Attention - Consult accompanying documents: alerts the
user to refer to the user documentation when complete
information cannot be provided on the label.
WARNING - Dangerous voltage
(the lightning flash with arrowhead in equilateral
triangle) is used to indicate electric shock hazards.
CE mark of conformity
Read the Service Manual.
Intended to alert the user to refer to the operator manual
or other instructions when complete information cannot
be provided on the label.
Waste Electrical and Electronic Equipment (WEEE)
Disposal
This symbol indicates that waste electrical and
electronic equipment must not be disposed of as
unsorted municipal waste and must be collected
separately.
Please contact an authorized representative of the
manufacturer for information concerning the
decommissioning of your equipment.
Prescription Device Label United States only
Indicates compliance with TUV safety standards
IEC 60601-1 3.1 edition Medical Electrical Equipment,
part 1 General Requirement for Safety.
(USA and Canada).
Chapter 1 - Introduction
Description
V ™ S M
ENUE ERVICE
Location
Probe connectors and
rating plate
Various
Various.
Rear of the system.
Rear of the system.
Rear of the system.
Rating Plate
ANUAL
1-23