Mpb Door Cover Replacement Procedure - GE Venue R1 Service Manual

P R E L I M I N A R Y
D 5771498-100, R
IRECTION
8-3-8

MPB Door Cover Replacement Procedure

8-3-8-1 Tools
Appropriate Phillips screwdriver
FRU Part #
Refer to
8-3-8-2 Time Required
5 min
8-3-8-3 Preparations
Shut down the Venue™ ultrasound unit, as described in
8-3-8-4 MPB Door Cover Removal Procedure
1) Remove all accessories.
•
2) Remove the following covers: Lower Front eTower cover, RS probe cover, Right Side eTower
Cover and the Left Side eTower Cover:.
•
•
•
•
3.) Loosen the four captive screws (two on each side), grip the MPB Door Cover at the bottom and pull
toward you to remove it.
8-16
6
EVISION
Table 9-8 .
on page 9-7
Accessories - Replacement Procedures
Lower Front eTower Cover Removal Procedure
RS Probe Cover Removal Procedure
Right Side eTower Cover Removal Procedure
Left Side eTower Cover Removal Procedure
Figure 8-8 Removing MPB Door Cover
Section 8-3 - Covers - Replacement Procedures
V
ENUE
Power Shut Down .
™ S M
ERVICE ANUAL