GE Venue R1 Service Manual page 285

P R E L I M I N A R Y
D 5771498-100, R
IRECTION
6.) Remove the PCIe plastic cable guide and attach it to the new T-PSB module.
•
8-4-12-5 T-PSB Module Installation Procedure
1.) Fit the T-PSB module and fasten with four screws.
2.) Install the T-CFE module.
•
3.) Install the T-FEPS module.
•
4.) Install the full Front End assembly:
•
5.) Refit the following covers: Lower Front eTower, Left side eTower, Right Side eTower, and RS Probe
Cover:
•
•
•
•
6.) Install all accessories.
•
7.) Turn ON power to the system.
Perform the checks listed in
6
EVISION
Plastic Cable Guide for CFE Removal Procedure
T-CFE Module Installation Procedure
Front End Power Supply (T-FEPS) Installation Procedure
Full Front End Installation
:
Right Side eTower Cover Installation Procedure
Left Side eTower Cover Installation Procedure
Lower Front eTower Cover Installation Procedure
RS Probe Cover Installation Procedure
Accessories - Replacement Procedures
Chapter 8 - Replacement Procedures
T-PSB Module Replacement Procedure
V ™ S M
ENUE ERVICE
on page 8-217
8-65
ANUAL