Mechanical Parts- Replacement Procedures; Mpb Front Metal Door Replacement Procedure - GE Venue R1 Service Manual

P R E L I M I N A R Y
D 5771498-100, R
IRECTION
Section 8-6

Mechanical Parts- Replacement Procedures

8-6-1

MPB Front Metal Door Replacement Procedure

8-6-1-1 Tools
Appropriate Phillips screwdriver.
FRU Part #
Refer to
8-6-1-2 Time Required
5 min
8-6-1-3 Preparations
1.) Shut down the Venue™ ultrasound unit, as described in
2.) Make sure the On/Off power switch is set to Off.
3.) Make sure the system is standing securely on a level surface, with the wheels in the locked position.
8-6-1-4 MPB Front Metal Door Removal Procedure
1.) Remove all accessories.
•
2.) Remove the Lower Front eTower cover.
•
3.) Release four captive screws and remove the MPB Front Metal Door.
8-78
6
EVISION
Table 9-9 .
on page 9-8
Accessories - Replacement Procedures
Lower Front eTower Cover Removal Procedure
Figure 8-63 Removing MPB Front Metal Door
Section 8-6 - Mechanical Parts- Replacement Procedures
V ™ S
ENUE
Power Shut Down .
M
ERVICE ANUAL