Mpb To Cockpit Cable Replacement Procedure - GE Venue R1 Service Manual

P R E L I M I N A R Y
D 5771498-100, R
IRECTION
8-7-2

MPB TO Cockpit Cable Replacement Procedure

8-7-2-1 Tools
• Appropriate Phillips screwdriver
• Flat-head screwdriver
8-7-2-2 Time Required
15 min
8-7-2-3 Preparations
1.) Shut down the Venue™ ultrasound unit, as described in
2.) Make sure the On/Off power switch is set to Off.
3.) Make sure the system is standing securely on a level surface, with the wheels in the locked position.
8-7-2-4 MPB TO Cockpit Cable Removal Procedure
1.) Remove all accessories.
•
2.) Remove the following covers: Lower Front eTower, Left side eTower, Right Side eTower, and Riser
Thermal covers,,
•
•
•
•
•
•
3) Perform MPB removal procedure.
•
4.) For systems with rear cockpit cable cover installed, perform the following steps:
a.) Disconnect the Wi-Fi adapter.
•
6
EVISION
Accessories - Replacement Procedures
RS Probe Cover Removal Procedure
Lower Front eTower Cover Removal Procedure
Left Side eTower Cover Removal Procedure
Right Side eTower Cover Removal Procedure
MPB Door Cover Removal Procedure
Riser Thermal Cover Removal Procedure
MPB Module Removal Procedure
Wi-Fi Adapter Removal Procedure
Chapter 8 - Replacement Procedures
V ™ S
ENUE
Power Shut Down .
M
ERVICE ANUAL
8-111