Configuring Pppoa - 3Com OfficeConnect 3C100XF Cli User's Manual

3com officeconnect 3c100xf: users guide
Hide thumbs Also See for OfficeConnect 3C100XF:
Table of Contents

Advertisement

16-2
C
16: C
HAPTER
ONFIGURING
3 Configure your NAT/PAT policies.
4 Determine your public IP addresses for your LAN and WAN by entering the following
5 Enter the following CLI commands:

Configuring PPPoA

Y
WAN P
S
OUR
ROTOCOL
ETTINGS
OCG-Adsl>>set profile <pppoe> protocol ip
local_ip_address <x.x.x.x> remote_ip_address <y.y.y.y>
OCG-Adsl>>set profile <pppoe> protocol ip default_route_option
enable routing both routing_protocols ripv2
OCG-Adsl>>add atmaal5 pvc <pvc34> vpi <0> vci <34>
OCG-Adsl>>add datalink ppp interface <atmaal:1/pvc34> profile
<pppoe>
To configure NAT, perform the following from the CLI:

OCG-Adsl>>set nat interface <interface name> option <NAT>
To configure PAT, perform the following from the CLI:

OCG-Adsl>>set nat interface <interface name> option <PAT>
To configure SuperNAT, perform the following from the CLI:

OCG-Adsl>>set nat interface <interface name> option
<SUPERNAT>
CLI commands:
OCG-Adsl>>list ip networks
Your WAN IP address is associated with your interface name. An example of a
WAN interface name is
OCG-Adsl>>add pat <tcp> interface <interface name>
private_address <ip address range> public_address <ip
address range> public_port <port range>
OCG-Adsl>>add pat <udp> interface <interface name>
private_address <ip address range> public_address <ip
address range> public_port <port range>
To configure PPPoA from the CLI, perform the following steps:
1 To configure PPPoA, you must enter a series of CLI commands.
The following example shows the CLI commands that are used to configure
PPPoA.
OCG-Adsl>>add profile <pppoa> network_service ppp
OCG-Adsl>>set profile <pppoa> network_service pppilc
OCG-Adsl>>set profile <pppoa> send_password <root>
OCG-Adsl>>set profile <pppoa> bridging disable
2 Enter one of the following CLI commands next:
Enter the following CLI command to make the OfficeConnect Gateway
automatically negotiate with the Service Provider for an IP address:
OCG-Adsl>>set profile <pppoa> protocol ip
address_selection negotiate
.
atmaal1:/pvc34

Advertisement

Table of Contents
loading

Table of Contents