23
Overview
SA Commands
Delete Command
delete sa
<0, 2147483647>
List Command
list sa
Show Command
show sa
<0, 2147483647>
S
A
ECURITY
C
OMMANDS
This section describes the Security Association commands accessible from the CLI.
An SA is an instantiation of a security relationship between communicating peers.
Both IP security protocol (IPSec) and internet key exchange module (IKE) require
and use SAs to identify the parameters of their connections.
The following table identifies the SA commands described in this chapter.
Command
Command Name
Type
Delete
delete sa <0, 2147483647>
List
list sa
Show
show sa <0, 2147483647>
Deletes the security association (SA) specified. A value of 0 deletes all the SA's in
the system. The list sa command displays all the valid SAs in the system. The
show sa command shows the details of a security association.
Lists all the (phase 1 and phase 2) valid security associations (SA) in the system.
The show sa command shows the details of a security association. The delete sa
command deletes a specified SA.
Shows the details of the security association (SA) specified. The list sa command
displays all the valid SAs in the system. The delete sa command deletes a specified
SA.
SSOCIATION
(SA)