3
Overview
Date and Time
A
DMINISTRATIVE
This chapter identifies and describes the administrative-related CLI commands of
the OfficeConnect Gateway. These commands are identified in the following list:
Time and Date Commands
NTP (Network Time Protocol) Commands
System Information Commands
Script Commands
File Commands
Uploading Configuration Files (Bulk File) Commands
Restore Factory Default Settings (Reset) Command
Reboot Command
The OfficeConnect Gateway uses the Network Time Protocol (NTP) to accurately
establish date and time for the unit.
You can use the show time command to confirm that date and time have been
established.
Date and time values are automatically set when the OfficeConnect Gateway is
powered up. Optionally, the following CLI commands can be used to manually set
these values.
The following table identifies the Date and Time commands accessible from the
CLI.
Command
Command Name
Type
Set
set date <date>
set date <date> time <time>
set time <time>
set timezone <string>
Show
show time
show date
CLI C
OMMANDS