Enable Commands - 3Com OfficeConnect 3C100XF Cli User's Manual

3com officeconnect 3c100xf: users guide
Hide thumbs Also See for OfficeConnect 3C100XF:
Table of Contents

Advertisement

12-8
C
12: IP R
HAPTER
OUTING
delete ip route
<network_name or
IP_address/subnet_mask>all
_learned_routes
delete ip source route
<ip_name_or_net_addr>

Enable Commands

enable ip
C
OMMANDS
This command takes effect only after all addresses have been released from the
pool. Also, when a IP pool is deleted, be sure to also delete the pool from any
associated user's profile.
Deletes the specified static/learned IP address or all learned routes (including
RIPv1/RIPv2 routes) from the IP Routing Table. The subnet mask value, which is
optional, takes the form of A, B, C and H, or a numeric value from 8 to 32. It also
accepts dot format, in which case the value must be 255.0.0.0 or greater and
contiguous. Deleting routes will cause IP packets destined for those networks to
use the default route which can be viewed using the list ip routes command. See
add ip defaultroute gateway and add ip route commands for more
information.
Delete the specified source route from the routing table. Specify the source route
by its network name or IP address.
Enables the following IP parameters:
address_pool_filtering
network
send_host_unreach_for_pool
address_pool_round_robin
proxy_arp_all_dialin
send_unsolicited_arp
directed_bcast_forwarding
respond_to_directed_bcast
source_address_filter forwarding
rip
static_remote_routes
multicast_heartbeat
security_option
Parameter
directed_bcast_forwarding
respond_to_directed_bcast
send_host_unreach_for_pool
Description
If there is a directed broadcast packet coming for the
OfficeConnect Gateway's directly connected network, the
OfficeConnect Gateway will forward that packet to the
interface depending on this configuration. Directed
broadcast will be forwarded only if the Destination IP
address of the packet matches with the broadcast route
installed for the interface. Default is disabled.
Disables the OfficeConnect Gateway from responding to
the ICMP requests, or generating ICMP error messages for
packets coming to a directed broadcast address of its
networks.
When disabled, if the address is a part of the configured IP
Address Pool, the OfficeConnect Gateway does not send
the ICMP host an unreachable message (irrespective of any
routing information).

Advertisement

Table of Contents
loading

Table of Contents