show network <name>,
show network settings
show packet_logging
show packet_logging
settings
show session
<user_name>
show system, show
system settings
Displays the configured settings for the specified network. For an example, see the
output from the show ip network command.
Displays settings for packet size and logging. For example:
PACKET LOGGING SETTING
Logging Packet Type:
Logging Packet Size:
Displays the session configuration for the specified user. It lists the following
information:
Service Type - Type of network service employed by the user: Login, Framed,
Administrative
Port Limit - Maximum number of dial-in ports a user can concurrently employ
Session Timeout - Interval in seconds this user has to remain connected
before being timed out
Idle Timeout - Interval in seconds this user has to remain idle before being
timed out
Speed of Connection - Estimate of the session's current bandwidth in bits per
second.
NAS IP Address - IP address of the OfficeConnect Gateway
NAS Port - Port attribute of the OfficeConnect Gateway
Login Ip Host - IP address of the host this user is currently logged into
Login Service - Type of login service employed by this user: Telnet, RLogin,
TCP, Ping
Login Port - Port number on the OfficeConnect Gateway where this user is
connected
INFORMATION FOR SESSION
Service Type:
Port Limit:
Modem Group:
Speed of Connection:
NAS IP Address:
Login Service:
Login Port:
Active Session ID
Displays the following system information:
System Descriptor - company designation of the OfficeConnect Gateway
including build date
Object ID - identifies this system to SNMP managers
System UpTime - time the system has been running since last boot
System Contact - name of person responsible for system. Modify using set
system command
Show Command 12-33
NONE
0
curly
Administrative
2
2000
Auto
147.14.24.157
Telnet
23