Set Command - 3Com OfficeConnect 3C100XF Cli User's Manual

20-4 C 20: N
HAPTER ETWORK
list available servers

Set Command

set network service
<admin_name>
S C
ERVICES OMMANDS
Name Server Type
tftpd TFTPD
DATA:
telnetd TELNETD
DATA:
Displays the available network servers and supported network services. The
choices are SNMP service, TELNET service, or TFTP service. The services listed by this
command are used in the server_type field of the add network service
command.
Server Type
Type
SNMPD NETWORK
TELNETD NETWORK
TFTPD NETWORK
The set network service command sets parameters for network services you
configured with the add network services command. You can list the configured
network services using the list network services command. Service must first be
disabled for this command to work. See the add network services command for
more information on the Data parameters.
The following parameters are associated with this set command:
close_active_connections [true | false]
data <string>
server_type [snmpd | tftpd | telnetd]
socket <socket_number>
These parameters are described in the following table.
Parameters Description
<admin_name> Designation you assigned to network service with the add network service
command. The limit is 64 ASCII characters.
close_active_ Indicates whether or not to close any active connections when a service is
connections shut by disable network_service. The default is False.
Parameters Description
data TELNET Ancillary Data. This field contains server-specific configuration data.
See table which lists the configurable ancillary data parameters in the add
network service command on page.
server_type Type of network service you wish to assign to this administration name.
Available services:
SNMPD - daemon supports SNMP on socket 161. Uses UDP.


TFTPD - daemon supports file transfer service on socket 69. Uses UDP.


TELNETD - daemon supports TELNET, to the CLI. Uses TCP.


socket The port the server listens on. For TFTP and TELNET, it is the TCP or UDP port
number. Socket numbers are the joined sender's (or receiver's) IP address and
service type's port number. The range is 0-65535.
Socket
69
23
Protoc Module Description
ol
UDP SNMPAgent SNMP agent.
TCP Telnet TELNET server, to the CLI.
UDP TFTP Server side of TFTP, for
accessing files.
Close Admin Status
FALSE Enabled
FALSE Enabled