Table of Contents
Advertisement
3-2
C
3: A
HAPTER
DMINISTRATIVE
Set Commands
set date <date>
set date <date> time
<time>
set time <time>
set timezone <string>
Show Command
show time
show date
NTP
CLI C
OMMANDS
The set date <date> command sets the date without changing the time. The
format is dd-mmm-[yy]yy. The month should be the first three characters of the
month name. The year can be expressed in either 2 or 4 digits - 01 or 2001.
The set date <date> time <time> command sets the system date and time.
Alternatively, the set date <date> command leaves the time unchanged. Use the
show date command to see the current settings for the date and time. The
format is dd-mmm-[yy]yy. The month should be the first three characters of the
month name. The year can be expressed in either 2 or 4 digits - 97 or 1997. The
time is expressed in hh:mm:ss format with seconds optional.
The set time <time> command sets the system time and leaves the date
unchanged. Use the show date command to view current settings. The format is
hh:mm:ss. The seconds field is optional. The set date <date> time <time>
command also sets the time.
The set timezone <string> command sets the local time zone. This time zone can
be a simple time zone rule or the name of one of the pre-defined time zone
names. To see a list of the pre-defined time zones, use the list time zones
command. All of the standard BSD Unix time zones are supported in the
OfficeConnect Gateway.
The local clock will adjust its time offset depending on the timezone settings. The
show ntp settings command displays the current active time zone along with
other information.
The show time command displays the system date, time, and uptime. For
example:
System Date
System UpTime:
The show date command displays the system date, time, and uptime. For
example:
System Date
System UpTime:
The OfficeConnect Gateway uses NTP to automatically set system date and system
time to the values provided by NTP servers installed on the network.
The OfficeConnect gateway maintains a list of known NTP servers installed on the
network. If a particular NTP server is not specified, the OfficeConnect Gateway
randomly selects two NTP servers front he list and designates them as the primary
and secondary NTP servers, respectively.
If an installed NTP server is not available on the network, the OfficeConnect
Gateway sets the system date and time using the values automatically provided at
system power-up, or the values set manually by the user with the CLI commands.
13-JUL-2041 19:25:11
0d 00:12:30
13-JUL-2041 19:25:11
0d 00:12:30
Advertisement
Table of Contents
