Table of Contents
Advertisement
3
Change the network settings by typing: 'SCP IP [ip_address] [subnet_mask]
[default_gateway]' (e.g., 'SCP IP 10.13.77.7 255.255.0.0 10.13.0.1'); the new settings
take effect on-the-fly. Connectivity is active at the new IP address.
This command requires you to enter all three network parameters (each
separated by a space).
4
To save the configuration, at the prompt, type 'SAR' and press enter; the V7122 restarts
with the new network settings.
Configuring the V7122 Basic Parameters
To configure the V7122 basic parameters use the Embedded Web Server's 'Quick Setup'
screen (shown in
Figure
accessing the 'Quick Setup' screen.
Figure 32
V7122 Quick Setup Screen
V6100 and V7122 User Guide
32). See
Accessing the Embedded Web Server
for information on
77
Advertisement
Table of Contents
