Tftp Commands; Overview; Tftp Command - 3Com OfficeConnect 3C100XF Cli User's Manual

28

Overview

TFTP Command

tftp <IP_name or address>
TFTP C
OMMANDS
TFTP (Trivial File Transfer Protocol) is a simplified version of the TCP/IP File Transfer
Protocol that allows the transfer of files from one computer to another over a
network. TFTP does not include password protection or user-directory capability.
This chapter identifies and describes the TFTP commands accessible from the
OfficeConnect Gateway CLI. The following table identifies the TFTP CLI
commands:
Command Command Name
Type
TFTP tftp <IP_name or address>
List list tftp clients
list tftp requests
Add add tftp client <IP_name_or _address>
add tftp request <input_file_name>
Delete delete tftp client <IP_name_or _address>
delete tftp request <input_file_name>
Enable enable tftp request <input_file_name>
Disable disable tftp request <input_file_name>
Set set tftp request <input_file_name>
Show show tftp request <input_file_name>
The tftp command initiates TFTP service from the CLI.
Specify an IP address/name to directly access the client or issue the tftp command
with your choice of ancillary values. Alternatively, you can use the add tftp
request <input_file_name> command to configure the TFTP service and use the
enable tftp request <input_file_name> command to activate TFTP service.
The tftp command parameters are described in the following table:
Value
ascii
binary
connect [host_name]
Effect
Set text mode to ASCII. Default
Set text mode to OCTET
Connect to the remote TFTP server