Table of Contents
Advertisement
set snmp trap_community
<community_name>
These parameters are described in the following table.
Parameters
<community_name>
access
address
community_pool
validate_address
The set snmp trap_community <community_name> command modifies
parameters for an SNMP trap community (authorized user or host to which trap
notifications are sent). The community name and IP address of SNMP requests
from managers on the network must match the list, which you can view using the
list snmp trap_communities
The following parameters are associated with the set snmp trap_community
<name> command:
address <IP_address>
trap_community_pool <name>
trap_validate_address [use_address | use_pool]
These parameters are described in the following table.
Parameters
Description
<community_name>
Trap group designation for a pool of management stations which
authorize SNMP requests.
address
IP address of this SNMP management station, expressed in the form
nnn.nnn.nnn.nnn
community_pool
Designation for the trap pool of IP addresses comprising this SNMP
community. The limit is 64 ASCII characters.
trap_validate_address Method to determine access to this management station. The
use_address value uses the specified IP address to validate access. The
use_pool value uses the list of IP addresses specified in the
trap_community_pool value to validate access.
Description
Group designation for a pool of management stations which
authorize SNMP requests.
Determines what type of access to SNMP MIBs the added user will
have. Options are Read Only (RO), Read Write (RW) and
Administrator (ADM). Administrator allows read access to all
objects and write access to all writable objects. RO is the default on
public (0.0.0.0) networks and RW the default on private networks.
IP address of this SNMP management station, expressed in the form
nnn.nnn.nnn.nnn
Designation for the pool of IP addresses comprising this SNMP
community. The limit is 64 ASCII characters.
Method to determine access to this management station. The
use_address value uses the specified IP address to validate access.
The use_pool value uses the list of IP addresses specified in the
community_pool value to validate access.
command.
Set Commands
25-9
Advertisement
Table of Contents
