Cli Commands; Add Command; Delete Command; Enable Command - 3Com OfficeConnect 3C100XF Cli User's Manual

19-2 C 19: T
HAPTER UNNELING

CLI Commands

Add Command

add pptp pns <1-9>

Delete Command

delete pptp pns <1-9>

Enable Command

enable pptp pns

Disable Command

disable pptp pns
C
OMMANDS
Command Command Name
Type
Disconnect disconnect pptp tunnel <number>
disconnect pptp <number> session <number>
List list all sessions vpn <domain name>
list all tunnels
list tunnel connections
list pptp pnss
list pptp tunnel <number> sessions
list pptp tunnels
Show show pptp
show pptp settings
show pptp tunnel
show pptp tunnel <number> session <number>
Set set pptp <number>
The tunnel commands do not apply to IPSec tunnel configurations. The
information displayed for IPSec using the Show tunnel <tunnelname>, List
tunnels and List tunnel connections commands is incorrect.
Adds a local PPTP network server (PNS) to the client (PAC) side of the PPTP tunnel.
Removes a local PPTP network server (PNS) from the client (PAC) side of the PPTP
tunnel created with the add pptp pns command.
Enables PPTP network server support. See disable pptp pns command. The
default is enabled
.
Disables the specified PPTP network server.