Exit Command; Help Command; Hide Command; History Command - 3Com OfficeConnect 3C100XF Cli User's Manual

EXIT Command

HELP Command

HIDE Command

HISTORY Command

HOST Command

INVARP Commands

JOIN Command

KILL Command

LEAVE Command

LIST Commands

COMMAND
DNS
INTERFACE
NETWORK
PPTP
SNMP
USER
Use the EXIT command to quit the Console Telnet CLI session.
Use the HELP command to obtain information about CLI commands and their
formats.
Use the HIDE command to stop the echoing of events being directed to the
SYSLOG from being displayed on your Telnet session.
Use the HISTORY command to display your previous CLI commands.
Use the HOST command to assign the name of a remote host.
Use the INVARP Commands for the following parameters:
PTMP_PVC_GROUP


PVC


Use the JOIN command to add a member to a group.
Use the KILL command to quit an active process. You can only kill a process that
you started. For example, a ping that you started.
Use the EXIT command to quit the Console Telnet CLI session.
Use the LIST commands to display a list of table entries. The LIST command can be
used to display the table entries for the following parameters:
ADSL
BRIDGE
DHCP_SERVER
FILTERS
L2TP
CRITICAL_EVENTS DATALINK
_TO_FLASH
FTP HTTP_SERVER
IP L2TP
NTP PPP
PROFILE RLOGIN
TCP TELNET
WAN_AUTO_CON WATCHDOG_
FIGURATION TIMER
ALL ATMAAL5
CRITICAL DHCP_CLIENT
DNS FACILITIES
FTP INTERFACES
NAT NATPOLICIES
Top level CLI Commands
DHCP_CLIENT
ICMP
LINK_TRAPS
PPPOE
SECURITY_OP
TION
TUNNEL
AVAILABLE
DHCP_PROXY
FILES
IP
NETWORK
2-3