Clear Commands; Copy Command; Delete Commands; Disable Commands - 3Com OfficeConnect 3C100XF Cli User's Manual

2-2 C 2: L O
HAPTER IST OF FFICE

CLEAR Commands

COPY Command

DELETE Commands

DISABLE Commands

DO Command

EDIT Command

ENABLE Commands

C G CLI C
ONNECT ATEWAY OMMANDS
Use the CLEAR command to clear the values/settings of the following parameters:
ARP_CACHE


IP


Use the COPY command to copy a file.
Use the DELETE commands to delete the values associated with the following
parameters:
ADDRESS_POOL
CONFIGURATION
FILTER
L2TP
POLICY
REG_DUMP
TELNET
USER
Use the DISABLE command to disable the following parameters:
ADSL
COMMAND
DNS
INTERFACE
NETWORK
PPTP
SNMP
USER
Use the DO command to run a script file that is stored in FLASH memory. This
script file contains a series of CLI commands.
Use the EDIT command to access the CLI editor to edit FLASH files.
Use the ENABLE command to enable the following parameters:
ADSL
ATMAAL5 BOARD
DATALINK DNS
FRAMED_ROUTE FTP
NAT NETWROK
PPPOE PPTP
SA SNMP
TFTP TRACEROUTE
ATMAAL5 AUTO_DOWN
LOAD
CRITICAL_EVENTS DATALINK
_TO_FLASH
FTP HTTP_SERVER
IP L2TP
NTP PPP
PROFILE RLOGIN
TCP TELNET
WAN_AUTO_CON WATCHDOG_
FIGURATION TIMER
ATMAAL5 AUTO_DOWN
LOAD
BRIDGE
FILE
IP
PING
PROFILE
SYSLOG
TUNNEL
BRIDGE
DHCP_CLIENT
ICMP
LINK_TRAPS
PPPOE
SECURITY_OP
TION
TUNNEL
BRIDGE