29-4
C
29: T
HAPTER
RACEROUTE
list traceroute row
<number> hops
Show Commands
show traceroute,
show traceroute
settings
show traceroute row
<number> settings
C
OMMANDS
Displays counters for specified traceroutes. It lists the following information:
Row - entry number in the Traceroute Table. The range is 1-255
Hop - number of hops taken to reach destination
IP address - IP address of destination
Round Trip Time - period to reach destination and return to the
OfficeConnect Gateway
ROW
HOP
IP address
1
1
11.0.0.20
1
2
10.0.0.2
These commands display the maximum number of traceroutes configurable using
the set traceroute maximum_rows command. See traceroute, list traceroute,
delete traceroute, and set traceroute maximum_rows commands for more
information. For example:
Maximum Rows in Table: 20
Displays results of the specified trace (entry in the Traceroute Table) using the
traceroute <IP_name or address> command. It lists the following information:
State - Status of the specified traceroute in the table. Possible states:
WAITING DNS - waiting for DNS resolution
DNS FAILED - destination address could not be resolved
BAD address - resolved IP address is illegal
HOPS EXCEEDED - maximum number of hops was exceeded
DEST UNREACHABLE - trace timed out because route to the host could
not be found
TRACING - performing traceroute
COMPLETED SUCCESSFULLY - traceroute completed successfully
RESOURCE FAILURE - not enough resources to complete the command
Hop Timeout - Interval in seconds before the OfficeConnect Gateway retries a
hop. The default is 3
Hop Probes - maximum attempts the OfficeConnect Gateway makes to learn
a hop before moving to the next hop. The default is 3
Max Hops - maximum number of hops the OfficeConnect Gateway takes to
trace before quitting. The default is 30
UDP Port - The OfficeConnect Gateway port number used trying to find the
route. The default is 33434
Data Size - amount of data in bytes sent in the traceroute packet. The range is
1-8184 bytes
.
ROUND TRIP TIME
100
100
.
.
.
.
.