Delete Commands
delete ip filter
<ip_filter_name>
delete ip rule <number>
filter <ip_filter_name>
List Command
list ip filters
Set Command
set interface
<interface_name>
Deletes an IP filter from the IP Filter Table.
Parameters
ip_filter_name
Deletes a packet-matching rule from an IP filter.
Parameters
number
ip_filter_name
Use this command to display a list of all IP filters.
The resulting screen display may look like the following:
Filter Name
boston
newyork
The set interface <interface_name> command has been modified by adding the
output_ip_filter <ip_filter_name> parameter to the command.
set interface <interface_name> output_ip_filter <ip_filter_name>
The output_ip_filter parameter has been added to this command to allow
specifying the name of the IP filter to be used on a network interface.
Parameters
interface_name
ip_filter_name
Description
Name of the IP filter.
Description
The number of the rule to be deleted from the specified IP
filter.
Name of the IP filter.
Action
REJECT
REJECT
Description
Name of a network interface.
Name of the IP filter to use on the interface.
CLI Commands
26-3