3Com OfficeConnect 3C100XF Cli User's Manual page 193

25
Overview
SNMP C
OMMANDS
SNMP (Simple Network Management Protocol) is a standardized method of
managing and monitoring network devices on TCP/IP-based internets.
This chapter identifies and describes the SNMP commands accessible from the
OfficeConnect Gateway CLI. The following table identifies the SNMP CLI
commands:
Command Command Name
Type
Add add snmp community <community_name>
add snmp community_pool <pool_name>
add snmp trap_community <name>
add snmp trap_community_pool <name> addresses <ip address list>
Delete delete snmp community <name>
delete snmp community_pool <pool_name>address <IP_address or
name>
delete snmp trap_community <name>
delete snmp trap_community_pool <name> addresses <ip address list>
Enable enable link_traps_interface
enable security_option snmp user_access
enable snmp authentication traps
Disable disable link_traps_interface
disable security_option snmp user_access
disable snmp authentication traps
List list snmp communities
list snmp community_pools
list snmp trap_communities
list snmp trap_community_pools
Set set snmp community
set snmp trap_community <community_name>
Show show snmp
show snmp community_pool <pool_name>
show snmp trap_community_pool <name>
show snmp counters