Table of Contents
Advertisement
10
Overview
Add Command
add atmaal5 pvc <name>
ATM C
OMMANDS
This section describes the ATM (Asynchronous Transfer Mode) commands
accessible from the CLI. ATM is a high-speed, connection-oriented switching
technology that can transmit voice, video, and data traffic simultaneously through
fixed-length packets, known as cells.
The following table identifies the ATM commands described in this chapter:
Command
Command Name
Type
Add
add atmaal5 pvc <name>
Delete
delete atmaal5 pvc <name>
Disable
disable atmaal5 pvc <name>
Show
show atmaal5 pvc
Creates a Permanent Virtual Circuit (PVC) for RFC-1483 compliant networks. To
configure multiple subnets, you must issue the command repeatedly, specifying
different network names and addresses. This command has the following
parameters:
interface <atmaal:1>
vice <number>
vpi <number>
These parameters are described in the following table.
Parameters
Description
<name>
Designation of the PVC to allow easy recognition and configuration on the
OfficeConnect Gateway. The limit is 64 ASCII characters.
address
Network IP address for the far side of the PVC (router).
interface
This release supports only the Span A logical interface for independent
configuration. The default is atmaal:5.
vci
Number of the Virtual Channel Indicator. The range is 32-65535.
vpi
Number of the Virtual Path Indicator. The default is 0. The range is 0-255.
Advertisement
Table of Contents
