Table of Contents
Advertisement
4-2
C
4: C
HAPTER
ONFIGURING AND
add address_pool user
<user_name>
Delete Commands
delete user <name>
delete address_pool user
<name> pool_name
<name>
Enable Command
enable user <name>
Disable Command
disable user <user_name>
M
U
ANAGING
SERS
The add user <name> command parameters are described in the following table.
Parameters
Description
[name]
Name of user to be added, up to 64 ASCII characters. The limit is No
more than 451 local users.
enabled
Optional. Indicates whether the user is enabled (YES) or disabled (NO)
by this command.
login_service
Protocol to be used for a login user. Options are:
RLOGIN
TELNET (default)
password
User password (optional). The limit is 127 ASCII characters. You can
create a null password with: password "".
type
Type of user - may be one or more types.
Login uses the login_service specified.
Network
Manage users have administrative authority.
Manage_readonly users do not have administrative authority
Assigns a user to a previously configured address pool. The command has the
following parameter:
pool_name <name>
When creating an address pool user, be sure to verify that a valid address pool
exists.
The delete user <name> command deletes a user you previously added to the
Local User Table. Use list users to see the currently defined user.
Removes a user previously assigned to the specified address pool with the add
address_pool user command.
The enable user <name> command allows a user to establish a session with the
OfficeConnect Gateway. Use the add user command to add a user. Use the list
users command to see the current state of all users.
The disable user <name> command disables the specified user from being used.
This affects LAN and WAN connections that depend on that user for parameters. It
Advertisement
Table of Contents
