List Commands - 3Com OfficeConnect 3C100XF Cli User's Manual

SNMP COMMUNITIES
Community
Name
home
office
washington
list snmp The list snmp community_pools command displays all entries in the SNMP
Community address Pool table. This command lists the following type of
community_pools
information:
COMMUNITIY POOLS
Name
westboro
shrewsbury
worcester
See add snmp community_pool <pool_name> command for more information.
The list snmp trap_communities command displays SNMP trap communities
list snmp
defined using the add snmp trap_community command. It lists the following
trap_communities
information:




Read/Only - read-only access to user-level objects allowed


Read/Write - read and write access to user-level objects and write access to


writable user-level objects allowed.
Administrator - read access to all objects and write access to all writable


objects allowed
Community Pool - Name for a pool of IP addresses comprising this SNMP
community
Validate address - Method selected to determine access to this community.
The use_address command uses the specified IP address to validate access,
use_pool uses the list of IP addresses specified in the community_pool value to
validate access. The type of information displayed for this command is shown
in the following example.
IP
Address
149.122.1
45.23
149.122.1
45.24
149.122.1
45.26
Number of
addresses
54
43
149
Community Name IP Address - trap community designation for the
associated system
Community Pool - name of the trap community pool. If the trap community
pool does not exist and the validate_address parameter is configured to use the
trap community pool, the name of the trap community pool displayed is
preceded by an asterisk.
Access Community
Pool
Administrat
or
Read/Write Boston
Read/Only

List Commands

25-7
Validate
address
use_address
use_pool
use_address