Table of Contents
Advertisement
Displays statistics of the specified PPTP tunnel. It lists the following information:
show pptp tunnel
<number>
Data Channel Delayed Acknowledgement Timeout - Interval in
milliseconds PPTP will wait to send acknowledge its peer when there are no
data or control packets to piggyback the acknowledge to. The default is 500
Data Channel Reassembly Timout - Interval in milliseconds PPTP uses to
determine the window to use before reassembling out-of-order packets. A low
value increases the chance that out-of-sequence packets will be lost. A high
value increases the period when PPTP processes packets received out of order.
The default of 0 may drop all out-of-sequence packets.
Data Channel Receive Packet Window - Size of the data channel receive
window sent to PPTP's peers. The default is 7
Inactivity Idle Timeout - Interval in seconds PPTP will wait inactively and send
a Hello packet. The default is 0
Echo reply timeout - Interval in seconds PPTP waits until a time-out occurs in
receiving a response to the Hello message.
Load balance status - Whether load balancing is enabled or disabled.
Logging Level - The logging level PPTP is set to. Choices: Disabled, Control
Packets, Control and Data Packet Headers and Control and Data Packets
Pptp Pns - Displays the state of PPTP network server support .
PPTP SETTINGS
Maximum Number of Sessions:
Maximum Number of Tunnels:
Number of Control Channel Seek Descriptors:
Flow Control:
Data Channel Delayed Acknowledgement Timeout
Data Channel Reassembly Timout
Data Channel Receive Packet Window:
Inactivity Idle Timeout:
Echo reply timeout:
Load balance status:
Logging Level:
Pptp Pns
:
Local control tunnel ID - identifier of the specified local control tunnel
Peer control tunnel ID - identifier of the specified remote control tunnel
Control tunnel state - current status of the specified control tunnel
Local init connection - indicates whether tunnel was established locally or not
IP address - remote peer's IP address
Local receive packet window - size of local send window
Remote receive packet window - size of remote receive window
Control tunnel receive packets - sum of control packets received on the
control tunnel
.
.
CLI Commands
19-5
.
451
451
64
ENABLED
500
0
7
60
90
ENABLED
CONTROL PACKETS
ENABLED
Advertisement
Table of Contents
