Table of Contents
Advertisement
12-26 C
12: IP R
HAPTER
OUTING
show ip routing
show ip routing settings
C
OMMANDS
Status - Enabled, ACTIVE, INACTIVE, Disabled
Reconfigure Needed - FALSE or TRUE. When displaying the value TRUE, this
setting notifies the administrator that the network should be reinitialized in
order for a newly configured parameter to take effect. Using the reconfigure
command allows the network to automatically re-enable without having to
manually disable and enable the network. The value FALSE indicates no
network editing has occurred and no reconfiguration is required.
IP Routing Metric - routing metric configured for this network. Range 1-16.
The default is 1.
SHOW IP NETWORK ipnet SETTINGS
Interface:
Network address:
Frame Type
Status:
Reconfigure Needed:
Mask
Station:
Broadcast Algorithm:
Max Reassembly Size:
IP Routing Protocol:
IP Routing Metric:
IP RIP Routing Policies
IP RIP Authentication Key
Displays parameter settings for the specified IP network. Statistics are gathered
from parameters configured with set ip routing.
IP Router Administrative Status - whether status is enabled or not. The
default is enabled
IP Static Remote Routes - whether static routes are enabled or not. The
default is enabled
LAN Host address - IP address of the OfficeConnect Gateway.
IP Autonomous System Number - system number assigned. The default is 1
IP Max Table Size - maximum number of IP Routing Table entries allowed. The
default is 1,024
.
IP Max Metric Entries - maximum metric entries allowed. The default is 512
IP RIP - whether RIP is enabled on not. The default is enabled
IP Number RIP Interfaces - number of RIP interfaces.
IP Number RIP Neighbors - number of IP RIP neighbors.
.
.
eth:1
165.134.145.124/22
ETHERNET_II
ENABLED
FALSE
255.255.252.0
165.134.145.124
IETF
3464
RIPV2
1
SEND_ROUTES
SPLIT_HORIZON
FLASH_UPDATE
SEND_COMPAT
RIPV1_RECEIVE
RIPV2_RECEIVE
.
.
.
Advertisement
Table of Contents
