12-34 C
12: IP R
HAPTER
OUTING
Reconfigure
Commands
reconfigure ip network
<network name>
C
OMMANDS
System Name - modify using set system command
System Location - site where system is located. Modify using set system
command
System Services - for example, Internet EndToEnd Applications
System Transmit Authentication Name - system-wide keyword for PPP on
the WAN, modified using set system command
System Version - loaded release version of the system software
.
SYSTEM DESCRIPTION
System Descriptor:
3Com Corporation OCG Built on Mar
Object
ID:
System UpTime:
System Contact:
System Name
System Location
System Services:
System Transmit Authentication
Name:
System Version:
Automatically reconfigures IP network parameters of an established static IP LAN
or PVC network. This command changes network parameters without the
administrator having to remove the router from service by manually disabling the
network, modifying its parameters and re-enabling it. This command modifies
static IP LAN networks only (cannot change interface and frame values for an
internal address). Network and interface names are limited to 64 ASCII characters.
This command has the following parameters:
address <IP_address>
interface <eth:1 | pvc>
frame [ethernet_ii | snap | atm1483]
wan_type [unptp | nptp | network | auto]
remote_address <remote_ip_address_and_mask>
Automatically reconfigures IP network parameters of an established static IP LAN
or PVC network. This command changes network parameters without the
administrator having to remove the router from service by manually disabling the
network, modifying its parameters and re-enabling it. This command modifies
static IP LAN networks only (cannot change interface and frame values for an
5 2000 at 19:24:.
1.3.6.1.4.1.429.2.19
0d 00:56:00
Ray-Man
OCGMAN
Steve's Lab
Internet EndToEnd
Applications
OCG
V5.0.7