Telnet Commands; Overview - 3Com OfficeConnect 3C100XF Cli User's Manual

5

Overview

T C
ELNET OMMANDS
This chapter identifies and describes the Telnet commands accessible from the
OfficeConnect Gateway CLI. These commands are available to users who remotely
log in to the OfficeConnect Gateway to establish a Console Telnet session.
The following table identifies the Telnet commands:
Command Command Name
Type
Telnet telnet <ip_name or address>
telnet <ip_name or address> TCP_port <number>
Remote rlogin <ip_name or address>
Login
rlogin <ip_name or address> TCP_port <number>
Add add telnet client <ip address/mask>
Delete delete telnet client <ip address/mask>
Enable enable telnet
Disable disable telnet
List list telnet clients
Show show telnet
To access these Telnet commands, Users must have valid Telnet login accounts.
These accounts are created by the Service Provider or Administrator. See Chapter
3, Configuring and Managing Users for more information.