Table of Contents
Advertisement
12-18 C
12: IP R
HAPTER
OUTING
set ip network <name>
C
OMMANDS
Configures the type of broadcast algorithm, the maximum size for reassembling
fragmenting packets, the RIP password, RIP export metric, RIP policies, the routing
metric and the routing protocol for the specified interface. The only required
parameter for this command is <name>. All other parameters are optional. You
can set all of them at once or one at a time. This command can only be used on IP
networks previously defined using the add ip network <network_name>
command. Use the list ip networks command to list the currently defined IP
networks.
The set ip network command has the following parameters:
broadcast_algorithm [bsd | ietf]
reassembly_maximum_size <number>
rip_authentication_key <string>
rip_export_metric <0-15>
rip_policies_update <rip_policies>
routing_metric <1-16>
routing_protocols [none | ripv1 | ripv2]
Parameters
<network_name>
broadcast_algorithm
reassembly_maximum
_size
rip_authentication_key
rip_export_metric
rip_policies_update
Description
Designation of the IP network for which you want to set
parameters. The limit is 64 ASCII characters.
Algorithm that determines which address is used in broadcasts to
represent the entire network. Choices are:
IETF - the IETF standard: nnn.nnn.nnn.255 (default)
BSD - the BSD standard: nnn.nnn.nnn.000
Maximum size IP datagram that the system will try to reassemble,
when the datagram has been fragmented to fit in the network
packet size. The default is 3464.
ASCII string used for RIPv2 authentication.
Number of hops to advertise routes via this IP network. This value is
set only when RIPv1 or RIPv2 routing_protocol is selected. When
the routing protocol is none, this value is automatically reset to the
default: 0. The range is 0-15.
Allows user to enable or disable RIP policies. See text on the
preceding page for description of keywords. A keyword with a no_
in front is used to disable the policy. Default policies are indicated
by (D).
Note: For Poison Reverse to work properly, Split Horizon must also
be enabled.
SEND_DEFAULT NO_SEND_DEFAULT(D)
SEND_ROUTES(D)NO_SEND_ROUTES
SEND_SUBNETSNO_SEND_SUBNETS(D)
ACCEPT_DEFAULTNO_ACCEPT_DEFAULT(D)
SPLIT_HORIZON(D)NO_SPLIT_HORIZON
POISON_REVERSENO_POISON_REVERSE(D)
FLASH_UPDATE(D)NO_FLASH_UPDATE
SEND_COMPAT(D)NO NO_SEND_COMPAT
RIPV1_RECEIVE(D)NO_RIPV1_RECEIVE
RIPV2_RECEIVE(D)NO_RIPV2_RECEIVE
SILENT (default is disabled)
Advertisement
Table of Contents
