Logout Command; Ping Command; Quit Command; Reboot Command - 3Com OfficeConnect 3C100XF Cli User's Manual

2-4 C 2: L O
HAPTER IST OF FFICE

LOGOUT Command

PING Command

QUIT Command

REBOOT Command

RECONFIGURE
Command

RENAME Command

RESET Commands

RESOLVE Command

RLOGIN Command

SAVE Command

SET Commands

C G CLI C
ONNECT ATEWAY OMMANDS
POLICY
PPTP
SA
TCP
TRACEROUTE
USERS
Use the LOGOUT command to quit and logout of the Console Telnet CLI session.
Use the PING command to send an ICMP echo request to a remote IP host A reply
from the pinged address indicates success.
Use the QUIT command to quit the Console Telnet CLI session.
Use the REBOOT command to reboot the OffIceConnect Gateway. Make sure that
you save your changes using the SAVE ALL command before rebooting.
Use the RECONFIGURE IP command to automatically reconfigure IP network
parameters of an established static IP LAN or PVC network.
Use the RENAME command to rename files within the FLASH file system.
Use the RESET command to reset the following parameters:
CONFIGURATION
PPPOE
Use the RESOLVE NAME command to return an IP address for a specified host
name to DNS for resolution.
Use the RLOGIN command to establish a remote login Console Telnet CLI session.
Use the SAVE ALL and SAVE CONFIGURATION commands to save your CLI
changes. The SAVE ALL command will permanently save your changes.
Use the SET command to edit the following system parameters:
BOOTB_MGR BRIDGE
COMMAND DATE
DNS FACILITY
HTTP_SERVER ILMI
L2TP MAXIMUM_LOCAL_USERS
PPP PPPOE
PROCESSES PROFILES
SESSIONS SNMP
TELNET TFTP
TUNNEL TUNNELS
VIRTUAL VOICE
DHCP_PROXY DHCP_CLIENT
BULK_FILE
DHCP_PROXY
FRAMED_ROUTE
INTERFACE
NAT
PPPOE_CLIENT
RTAB
SYSLOGS
TIMEZONE
UDP
DHCP_SERVER
CLEARTCP
DHCP_SERVER
FTP
IP
NETWORK