Pzd Zone - INVT Goodrive3000 Series Operation Manual

Goodrive3000 series medium voltage VFD
Response (from VFD to master)
Response
Example 2: Modifying the value of a parameter (only on the RAM)
To modify the value of the running frequency upper limit parameter (of which the address is 4), you can
set PKW1 to 2 and PKW2 to 4. The to-be-modified value (50.00Hz) is in PKW4.
Request (from master to VFD):
Request
Response (from VFD to master)
Response
Example 3: Modifying the value of a parameter (both on the RAM and EEPROM)
To modify the value of the running frequency upper limit parameter (of which the address is 4), you can
set PKW1 to 2 and PKW2 to 4. The to-be-modified value (50.00Hz) is in PKW4.
Request (from master to VFD):
Request
Response (from VFD to master)
Response

9.4.3 PZD zone

PZD zone (process data zone): The PZD zone in a communication packet is designed for controlling
and monitoring VFDs. The master and slave nodes always process the received PZD with the highest
priority. The processing of PZD takes priority over that of PKW, and the master and slave nodes always
PKW1 PKW2 PKW3 PKW4
00 01 00 04 00 00 50
0001: Response (parameter value is refreshed)
PKW1 PKW2 PKW3 PKW4
00 02 00 04 00 00 50
0002: Modifying the value of a parameter
PKW1 PKW2 PKW3 PKW4
00 02 00 04 00 00 12
0001: Response (parameter value is refreshed)
PKW1 PKW2 PKW3 PKW4
00 04 04 04 00 00 50
0004: Modifying the value of a parameter
PKW1 PKW2 PKW3 PKW4
00 01 00 04 00 00 50
0001: Response (parameter value is refreshed)
-280-
CW CW PZD2 PZD3
00 02 00 xx xx xx xx
5000: Parameter value of address 4
CW CW PZD2 PZD3
00 02 00 xx xx xx xx
5000: Parameter value of address 4
CW CW PZD2 PZD3
30 02 00 xx xx xx xx
CW CW PZD2 PZD3
04 02 00 xx xx xx xx
5000: Parameter value of address 4
CW CW PZD2 PZD3
00 02 00 xx xx xx xx
PROFIBUS communication
... PZD12
... xx xx
... PZD12
... xx xx
... PZD12
... xx xx
... PZD12
... xx xx
... PZD12
... xx xx