Skoda OCTAVIA MK1 Service Manual page 25

4 - Belt pulley
– can be installed only in one position
5 - 45 Nm
6 - AC generator
to facilitate the positioning of the AC
– generator on the holder drive the
threaded bushings of the retaining
screws slightly backwards
7 - AC compressor
– Do not open refrigerant circuit
to facilitate the positioning of the AC
– compressor on the holder drive the
threaded bushings of the retaining
screws slightly backwards
8 - Distance sleeve
9 - Support
10 -
– order of tightening
11 - Hollow screw, 30 Nm
12 - Gasket ring
– replace
13 - Pressure line
The vane pump for the power-assisted
14 -
steering
to facilitate the positioning of the
– hydraulic pump on the holder drive the
threaded bushings of the retaining
screws slightly backwards
removing and installing:
–
rep. size 48
15 - Belt pulley
– for vane pump
16 - Fixing screw
Screw with firmness 8.8; 25 Nm - replace,
– as replacement, use a screw with
firmness 10.9 → Electronic Catalogue of
Original Parts
45 Nm
→ Fig.
→ Running gear;
25