Skoda OCTAVIA MK1 Service Manual page 190

q with coolant temperature gauge sensor -G2-
q check
q before removing, reduce pressure in cooling system if necessary
20 -
q check tightness
21 -
q replace if damaged
22 - Engine speed sender -G28-
q check
23 -
q
24 -
q
q for injection valves (-N30-...N33)
25 -
q
q for variable intake manifold changeover valve -N156-
26 -
if no stops are present for correct gasket ring position at the bottom part of the intake
manifold:
q Stick gasket ring with glue -D 000 801- and hardener -D 000 802- to the bottom part of the
intake manifold.
q Fitting position:
27 -
q
q for engine speed sender
q Fitting location
28 -
q
q for lambda probe and heating for lambda probe
q Contacts 3 and 4 gilded
→ Chapter
Split pin
→ Chapter
Gasket ring
replace
Connector
black, 2 pin
Connector
black, 2 pin
Gasket ring
→ Fig.
3-pin connector
grey
→ Chapter
4-pin connector
black
O-ring
*
190