Slacken the screws from gearbox mount
–
from the top -arrows-.
– Carefully lower the engine with gearbox.
Note
Engine with gearbox must be guided
carefully, in order to avoid damage and
body damage.
Securing the engine to the assembly stand
Secure the engine with the engine and gearbox mount -MP 1-202- and on the assembly
stand before performing assembly work.
Note
When measuring the cylinder bore
stand.
Procedure
Position the engine and gearbox with the
–
engine/gearbox jack e.g. -V.A.G 1383 A -
onto the storage table.
Lower the engine with gearbox in such a
–
way that the gearbox is positioned on the
support.
Release screws -1 through 8- at
–
engine/gearbox flange.
– Pull off plug in hole of torque converter
→ Fig.
the engine must not be fixed to the assembly
17