Skoda OCTAVIA MK1 Service Manual page 100

Unscrew 4 bolts -arrows- attaching
–
bottom radiator mount.
For vehicles with air conditioning
– Pull out radiator and condenser slightly.
Take off bracket -arrow- for refrigerant
–
line.
For all vehicles
– Remove fan shroud (4 bolts).
Note
When removing and installing the fan
shroud, ensure that the radiator fins are
not damaged.
– Carefully remove radiator downward.
Install
Installation is performed in the reverse
order. Pay attention to the following points:
– Tighten thermoswitch -1- to 35 Nm.
–
shown.
– Filling system with coolant → Chapter.
100