Unhook throttle control cable
–
-arrows-.
Vehicles fitted with a manual gearbox
Press off shift rods -1- and -2- with a
–
screwdriver.
Unbolt shift mechanism at gearbox
–
-arrows-.
Remove the slave cylinder -arrows- and
–
lay aside, secure with wire, do not open
the line system.
Note
Do not depress the clutch pedal.
Unplug connector from reversing light
–
switch -F4 -.
Detach wiring loom for the fixtures and
–
run out to the side.
Vehicles with automatic gearbox
12