Skoda OCTAVIA MK1 Service Manual page 14

Remove fuel feed line -1- and fuel feed
– line -2-, to do so press latch clips at the
separation point. Lines and release
buttons are colour-coded.
– Detach hose -3- at the ACF tank.
– Detach coolant hoses:
to expansion reservoir (at front coolant
t
pipe)
to thermostat housing (at bottom of
t
radiator and at thermostat housing)
to top radiator (at left flange on cylinder
t
head)
to heating system heat exchanger (each
t 1 hose at coolant pipe and left at cylinder
head)
t lateral at coolant pipe
t at throttle valve supports (2 hoses)
at ATF radiator (vehicles with an
t
automatic gearbox)
Disconnect the vacuum line from the
–
brake servo unit.
Note
Mark the rotation direction before
removing the V-ribbed belt. Reversing the
rotation direction of an already used belt
may destroy it. Pay attention to the correct
position of the V-ribbed belt in the belt
pulley when installing it.
14